|
Product Details:
Payment & Shipping Terms:
|
Application: | Casting Industry | Dimension: | Customized |
---|---|---|---|
Bulk Density: | 1.80g/cm3 | Ash Content: | 0.1% Max |
Porosity: | 13% | Shore-hardness: | 48 HSD |
Advantage: | Polished Inner Surface | Certification: | ISO19000 |
High Light: | graphite casting rods,graphite round bar |
Length 20mm Extrusion Polishing Carbon high pure Stirring Rod , Self Lubricating Graphite Round Bar
Our Services |
Our Service
1. Our sales team will response for your question within 24 hours.
2. Technical Support will be available in any time.
3. Free replacement will provide once the failure confirmed caused by our product quality.
4. We can provide new graphite products accroding to customers' samples and drawings.
5. We can provide new graphite products accroding to customers' samples(graphite mold or diamond
drill bit) and drawings.
Our Faith:
Respect Every Customer,Maximize customer’s Profit.
Our Service Philosophy:
Give best service,give fast response,give quick action.
Graphite Production Flow |
Export Market Distribution |
Main Foreign Markets
|
Total Revenue(%)
|
North America
|
40.00%
|
Western Europe
|
25.00%
|
Eastern Europe
|
15.00%
|
Eastern Asia
|
10.00%
|
Mid East
|
5.00%
|
Southeast Asia
|
5.00%
|
Order Process |
1.Receive the inquiry
2.Send the quotation
3.Ask for an original sample
4.Pay for the sample’s fee
5.Producing samples
6.Sample testing
7.Confirm Order
8.If not confirm, will test the sample again
Our History |
EG Graphite Industry Co,,Ltd GuiLin Factory is a manufacturer to produce and develop graphite moulds,
was founded in 2012.
From 2013,EG has been the only supplier of Graphite mould to " Champion Union"Group.
From 2014,EG was approved by the QUALITY MANAGEMENT SYSTEM ISO9001-2000;
Advanced Equipments and professional engineers help EG Industry develop rapidly, after 5 years
development, EG team greatly expand the product diversity and be a leading manufacturer in China.
Ingredients |
Volume density | 1.8g/cm3 |
Granularity | 15um |
Resistivity | 8~10uΩm |
Heat conductivity | 125W/m.k |
Thermal expansivity | 4.9(10-6/℃) |
Shore-hardness | 48 HSD |
Bending strength | 35 Mpa |
Compressive strength | 70 Mpa |
Elasticity modulus | 99.5 Gpa |
Porosity | 13% |
Ash content | 500 PPM |
Purification of ash | 50 PPM |
Using instruction: |
1. Avoid contacting of hot molten metals with water, oil, grease, etc. It may cause excessive spatter and
burns.
2. Do not uses in flammable vapors or dust, a fire or explosion may happen.
3. void fire, mould must be stored in dry, well-ventilated area, away from open flame and excessive heat.
4. Avoid looking directly at the light of the reaction. It may irritate your eyes.
5. Wear safety glasses and leather gloves to use the mould.